Suitable for office and/or home use. Aluminium Blinds can be used in all venues including wet areas.
Produced from 16mm and 25mm wide aluminum slats.
Aluminum blind curtain systems provide users a decorative appearance and practicality in all places, including homes and offices, they are produced in the desired colors and sizes produced as required by the users and are easily assembled.
HOW TO TAKE ACCURATE MEASUREMENTS FOR ALUMINIUM BLINDS?
Considering the suitability of the curtain and the mounting location, the curtain size can be taken from the ceiling, wall or over the window joinery.
Since the blind moves vertically up and down, care must be taken that it does not hit the door or window handle while measuring.
WHILE MOUNTING ON A CEILING OR WALL;
The movable sashes of the window are determined, and the measurements of each separate section in the window are taken separately from their vertical floors.
The measurements are taken by moving 5-10 cm on the outer edges of the window.
It is recommended not to exceed 250 cm in width with a single piece blind.
The height measurement can be taken from the ceiling or the wall to the marble under the window.
In places where the windows open and are very close to the ceiling, the collection margin of the blind should be taken into account.
WHILE MOUNTING ON THE WINDOW FRAME;
For measurement, each section on the window joinery is measured separately. Measurments are taken in such a way that the window handles are outside on the opened sash on the window.
The blind shall be moving with the window when you open and close the glass.
These measurements of the length of the blinds is limited to the length of the joinery around the windows.
